SPRINTER ACCESSORY GEAR RAIL [POWERED]
Expected to arrive in stock the first week of December, shipped in the next 48 hours.Stay Organized on Every Adventure
The more time you spend on or off the road, the more gear you need within reach—whether it’s apps, maps, or a Garmin, simple charging ports, or accessory mounts. Unfortunately, most gear mounting solutions end up cluttered, like the inside of an overpacked Uber.
Design: We weren’t satisfied with the market’s existing options, so we did what we do best: we built our own. Our goal? To create a billet-machined aluminum rail that not only feels premium but also looks fantastic. We engineered laser-cut brackets that mount into the cubby and utilize a dash mounting screw for rock-solid stability. Installation is straightforward, making this a true DIY product that any van owner can install with ease.
Power: Wires can turn even the sleekest setup into a mess. That’s why we designed a custom three-slot USB power solution (two USB-C ports and one standard USB), tapping directly into the existing cigarette accessory power beneath the cup holders. The easy-access design allows the top of the cup holder to pop out with a simple tug, making installation a breeze. We include all the necessary hardware and wiring to ensure a clean, professional finish.
Cable Management: Our rail is designed to sit slightly off the dash, allowing cables to run neatly behind it and directly to the power socket—no tangled mess.
Location: Positioning was key. We wanted the rail to be easily accessible but not block the windshield or any factory systems. Our mounting solution sits perfectly below the MMI screen and above the HVAC controls, providing full access to both the cup holders and your gear.
Mounting System: We’ve chosen the 20mm Bulletpoint mounting system, known for its high-end materials like machined aluminum and carbon fiber. In terms of quality and aesthetics, there’s no better option available.
Aesthetic: Following the factory Sprinter’s two-tone black and grey interior, we’ve powder-coated the laser-cut brackets in black, allowing them to blend seamlessly into the dashboard. The machined rail is anodized in gunmetal grey for a clean, factory look that also reflects the premium quality and craftsmanship behind the product.
Versatility: Our mounting rail is designed to securely hold phones, tablets, GPS units, communication devices, and more—keeping your essential gear organized, accessible, and safe.
Details:
Fits: Sprinter VS30 2019-present 2500 and 3500
10 possible mounting locations
Laser cut brackets (black) and machined billet rail (gunmetal) - Gunmetal for final units will be slightly darker than this image
The USB hub includes ready-to-go wiring. (two USB-C port and one standard USB)
USB C 30W and QC 3.0 18W Car USB Port (Sprinter Fuse is 15A)
Solid and secure mounting
20mm machined mounting balls sold separately
Also works with 1" RAM Balls
Install is straightforward and is very DIY. Including the USB power hub
Includes Hardware
Expected to arrive in stock the first week of December, shipped in the next 48 hours.Stay Organized on Every Adventure
The more time you spend on or off the road, the more gear you need within reach—whether it’s apps, maps, or a Garmin, simple charging ports, or accessory mounts. Unfortunately, most gear mounting solutions end up cluttered, like the inside of an overpacked Uber.
Design: We weren’t satisfied with the market’s existing options, so we did what we do best: we built our own. Our goal? To create a billet-machined aluminum rail that not only feels premium but also looks fantastic. We engineered laser-cut brackets that mount into the cubby and utilize a dash mounting screw for rock-solid stability. Installation is straightforward, making this a true DIY product that any van owner can install with ease.
Power: Wires can turn even the sleekest setup into a mess. That’s why we designed a custom three-slot USB power solution (two USB-C ports and one standard USB), tapping directly into the existing cigarette accessory power beneath the cup holders. The easy-access design allows the top of the cup holder to pop out with a simple tug, making installation a breeze. We include all the necessary hardware and wiring to ensure a clean, professional finish.
Cable Management: Our rail is designed to sit slightly off the dash, allowing cables to run neatly behind it and directly to the power socket—no tangled mess.
Location: Positioning was key. We wanted the rail to be easily accessible but not block the windshield or any factory systems. Our mounting solution sits perfectly below the MMI screen and above the HVAC controls, providing full access to both the cup holders and your gear.
Mounting System: We’ve chosen the 20mm Bulletpoint mounting system, known for its high-end materials like machined aluminum and carbon fiber. In terms of quality and aesthetics, there’s no better option available.
Aesthetic: Following the factory Sprinter’s two-tone black and grey interior, we’ve powder-coated the laser-cut brackets in black, allowing them to blend seamlessly into the dashboard. The machined rail is anodized in gunmetal grey for a clean, factory look that also reflects the premium quality and craftsmanship behind the product.
Versatility: Our mounting rail is designed to securely hold phones, tablets, GPS units, communication devices, and more—keeping your essential gear organized, accessible, and safe.
Details:
Fits: Sprinter VS30 2019-present 2500 and 3500
10 possible mounting locations
Laser cut brackets (black) and machined billet rail (gunmetal) - Gunmetal for final units will be slightly darker than this image
The USB hub includes ready-to-go wiring. (two USB-C port and one standard USB)
USB C 30W and QC 3.0 18W Car USB Port (Sprinter Fuse is 15A)
Solid and secure mounting
20mm machined mounting balls sold separately
Also works with 1" RAM Balls
Install is straightforward and is very DIY. Including the USB power hub
Includes Hardware