OWL: PISMO SPRINTER BUMPER
The new Owl Pismo bumper is a beautiful evolution of the Sprinter bumper. Compact, clean, and sleek while retaining an aggressive but factory look.
Manufactured of rugged steel, this bumper allows the mounting of a 5000 kg winch and adds dual recovery points and a hitch mount.
Designed in partnership with one of the industry's largest bumper manufacturers you can rest assured the quality and longevity are up to the toughest challenges. This bumper is bulletproof and you know Owl has put it to the test (breaking gear is our pastime!)
Can we also talk about how good it looks? Blending effortlessly into the lines of the Sprinter while adding just the right amount of toughness with a 1.875" bull bar. The Pismo protrudes only a few inches from the factory plastic bumper which gives it a more subtle look.
Sensors:
The Pismo relocates both the radar sensor and the parking sensors and both should function like factory. Importantly, the radar sensor is mounted within, not above, the bumper as it is on other bumpers. The lower mounting keeps the sensor much closer to the factory height to ensure proper function.
Recovery:
For those wanting to take their van off the beaten path, it is critical you have solid recovery points and a winch. As they say, prepare to self-rescue. Whether it is pulling yourself out of a sticky situation, or helping a stranded vehicle, once you have a winch, you won't know how you managed without one.
Fits Sprinter 2500 4x4 VS30 vans 2019-2022. 2023 AWD (a few AWD vans will require the brackets below for the 3500 models)
3500
VS30 and 2wd models (2019-2022) - require additional brackets, see below for details
Ultra-Rugged Steel Design
Round tube bull bar 1.875"
Includes Additional Front Hitch 2"
Dual Tow Shackle Mounts (shackles not included) 1"
Winch-ready (winch sold separately) Warn VR-EVO 12k, Warn Zeon 12k and Superwinch 12k
Works with all front parking sensors (including adaptive cruise controls)
Front hitch weight rating 136 kg.
Clears front camera (you can see the edge of the bar in the front camera)
*Winch, Shackles, fairleads shown in photos are sold separately
*Vans with factory rear AC may have to make modifications to make the Pismo fit. (this is mainly for vans that started life as a passenger van and have a separate rear AC)
Installation at our local Mercedes Dealership Partner is an additional: 900 CHF (includes winch installation and wiring).
The new Owl Pismo bumper is a beautiful evolution of the Sprinter bumper. Compact, clean, and sleek while retaining an aggressive but factory look.
Manufactured of rugged steel, this bumper allows the mounting of a 5000 kg winch and adds dual recovery points and a hitch mount.
Designed in partnership with one of the industry's largest bumper manufacturers you can rest assured the quality and longevity are up to the toughest challenges. This bumper is bulletproof and you know Owl has put it to the test (breaking gear is our pastime!)
Can we also talk about how good it looks? Blending effortlessly into the lines of the Sprinter while adding just the right amount of toughness with a 1.875" bull bar. The Pismo protrudes only a few inches from the factory plastic bumper which gives it a more subtle look.
Sensors:
The Pismo relocates both the radar sensor and the parking sensors and both should function like factory. Importantly, the radar sensor is mounted within, not above, the bumper as it is on other bumpers. The lower mounting keeps the sensor much closer to the factory height to ensure proper function.
Recovery:
For those wanting to take their van off the beaten path, it is critical you have solid recovery points and a winch. As they say, prepare to self-rescue. Whether it is pulling yourself out of a sticky situation, or helping a stranded vehicle, once you have a winch, you won't know how you managed without one.
Fits Sprinter 2500 4x4 VS30 vans 2019-2022. 2023 AWD (a few AWD vans will require the brackets below for the 3500 models)
3500
VS30 and 2wd models (2019-2022) - require additional brackets, see below for details
Ultra-Rugged Steel Design
Round tube bull bar 1.875"
Includes Additional Front Hitch 2"
Dual Tow Shackle Mounts (shackles not included) 1"
Winch-ready (winch sold separately) Warn VR-EVO 12k, Warn Zeon 12k and Superwinch 12k
Works with all front parking sensors (including adaptive cruise controls)
Front hitch weight rating 136 kg.
Clears front camera (you can see the edge of the bar in the front camera)
*Winch, Shackles, fairleads shown in photos are sold separately
*Vans with factory rear AC may have to make modifications to make the Pismo fit. (this is mainly for vans that started life as a passenger van and have a separate rear AC)
Installation at our local Mercedes Dealership Partner is an additional: 900 CHF (includes winch installation and wiring).
