HEADLINER SHELF - 2019+ (VAN WIFE)
The 2019 Sprinter Headliner Shelf is a black, powder-coated shelf that sits just above the visor storage in the cab. This creates a huge amount of storage in what is now a dead area of the van.
Our updated design features a sleek, round curtain rod with improved attachment points, all using an allen wrench. The curtain rod brackets are attached with nuts and bolts, making it easier to remove completely. The curtain rod ends have an upgraded threaded bolt system to easily install our Stealth Blackout Curtain.
Fits: VS30 Sprinter 2500 and 3500 4x4, AWD, 2WD.
Required tools:
5/32 allen wrench
T-20 Torx bit (for removing factory bolt)
T-27 Torx bit (for removing factory bolt)
Blackout Curtain (Optional)
Our Stealth Blackout Curtain was born from trying to go stealth mode (staying in a place not designated for camping) in our van. We used to put window coverings in the front windows, but this seemed to signal to everyone around us that we were sleeping in the van and resulted in getting asked to leave. The Stealth Blackout Curtain allows us to simply close a curtain each night and makes our van look like a parked vehicle, not a camper. The curtain is tailored from heavy-duty diamond rip-stop fabric to the curves of the van and includes carefully placed magnetic and tie closures to block light from leaving the van, which would ruin stealth mode. This curtain is a must-have for anyone planning on urban camping in their van! The curtain simply ties back to stay out of the way when not in use. The curtain also helps tremendously with heat blockage from the front of the van while trying to stay cool in the back.
The Stealth Blackout Curtain is designed to accommodate diesel heater vents under the front seat, so intentionally does not reach the floor. Also, magnets on the sides of the curtain will need metal to stick to. If you have plastic or fabric over your metal, plan to tuck the curtain under something or add metal clips to magnetize it on one or both sides.
The 2019 Sprinter Headliner Shelf is a black, powder-coated shelf that sits just above the visor storage in the cab. This creates a huge amount of storage in what is now a dead area of the van.
Our updated design features a sleek, round curtain rod with improved attachment points, all using an allen wrench. The curtain rod brackets are attached with nuts and bolts, making it easier to remove completely. The curtain rod ends have an upgraded threaded bolt system to easily install our Stealth Blackout Curtain.
Fits: VS30 Sprinter 2500 and 3500 4x4, AWD, 2WD.
Required tools:
5/32 allen wrench
T-20 Torx bit (for removing factory bolt)
T-27 Torx bit (for removing factory bolt)
Blackout Curtain (Optional)
Our Stealth Blackout Curtain was born from trying to go stealth mode (staying in a place not designated for camping) in our van. We used to put window coverings in the front windows, but this seemed to signal to everyone around us that we were sleeping in the van and resulted in getting asked to leave. The Stealth Blackout Curtain allows us to simply close a curtain each night and makes our van look like a parked vehicle, not a camper. The curtain is tailored from heavy-duty diamond rip-stop fabric to the curves of the van and includes carefully placed magnetic and tie closures to block light from leaving the van, which would ruin stealth mode. This curtain is a must-have for anyone planning on urban camping in their van! The curtain simply ties back to stay out of the way when not in use. The curtain also helps tremendously with heat blockage from the front of the van while trying to stay cool in the back.
The Stealth Blackout Curtain is designed to accommodate diesel heater vents under the front seat, so intentionally does not reach the floor. Also, magnets on the sides of the curtain will need metal to stick to. If you have plastic or fabric over your metal, plan to tuck the curtain under something or add metal clips to magnetize it on one or both sides.
